Klüber Klübersynth UH1 14-151 0.4 Kg

Ga naar het einde van de afbeeldingen-gallerij

Ga naar het begin van de afbeeldingen-gallerij

97% geleverd binnen 2 dagen

Verzendtarieven

Zakelijk bestellen op factuur - 30 dagen

Betaal veilig online of op factuur (30 dagen)

Overzicht

Klüber Klübersynth UH1 14-151

Synthetic lubricating grease for the food and pharmaceutical processing industry

Application Klüber Klübersynth UH1 14-151

Used for machines and equipment in the food processing and pharmaceutical industry, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Klübersynth UH1 14-151 at all lubrication points, in order to avoid problems due to lubricant contamination. This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc.

Gegevens

Performance, Features & Benefits of Klüber Klübersynth UH1 14-151 are:

Good corrosion protection reduces the risk of premature bearing failure
Good pumpability in centralized grease system prevents grease starvation
For a wide service temperature range due to the soft consistency of the grease
ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

If you have any questions, please contact OilOnline Technical Helpdesk

Product Description Klüber Klübersynth UH1 14-151

Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability. Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Typical Characteristics

Product specifications :		Klüber Klübersynth UH1 14-151
Article number		096037
NSF-H1 registration		056 354
NLGI grade,	DIN 51818	1
Lower service temperature		-45 °C / -49 °F
Upper service temperature		120 °C / 248 °F
Colour space		beige
Texture		homogeneous
Density at 20 °C		approx. 0.90 g/cm³
Worked penetration, 25 °C, lower limit value	DIN ISO 2137	310 x 0.1 mm
Worked penetration, 25 °C, upper limit value	DIN ISO 2137	340 x 0.1 mm
Flow pressure of lubricating greases, test temperature:-45 °C	DIN 51805	<= 1 400 mbar
Speed factor (n x dm)		approx. 500 000 mm/min
Drop point,	DIN ISO 2176, IP 396	>= 250 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.		24 months

Application notes

Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems. Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of relubrication.

Product Questions

Vragen van klanten